Verra

Will a tap filter fit my kitchen tap? Thread types explained

By the Verra team · Updated

Short answer

Unscrew the small mesh cap (aerator) at the end of your tap spout. If the spout has threads on the inside, it's an inner-thread tap; if the threads are on the outside, it's outer-thread; if there are no threads, it's threadless. Kitchen by Verra fits inner-thread and outer-thread taps with the 4 adapters in the box, but not threadless taps.

Check your tap in 30 seconds

  • Unscrew the aerator at the tip of the spout (anticlockwise, looking from below). Use a cloth for grip if it's tight.
  • Look at the spout end. Threads on the inside means inner-thread (female); threads on the outside means outer-thread (male).
  • No threads, or a spout that ends in a smooth pipe, means threadless.

The common sizes

Most kitchen taps use metric aerator threads. Aerator makers such as Neoperl list M24×1 among their standard threads. The usual pairing is an M24×1 aerator that screws into an inner-thread spout, and an M22×1 aerator that screws onto an outer-thread spout. Retailers don't always label these consistently, so check whether the thread is inside or outside rather than relying on the number.

Which taps Kitchen by Verra fits

There are 4 adapters in the box, and installation takes about five minutes with no plumber. See the installation guide for the steps, or message us on WhatsApp with a photo of your tap if you're unsure.

Your tapKitchen by Verra
Inner-thread spoutFits, with the adapters in the box
Outer-thread spoutFits, with the adapters in the box
Threadless spoutDoesn't fit

Questions people ask

My tap has no thread. Can I still use a tap filter?

Kitchen by Verra doesn't fit threadless taps. Swapping the tap for a threaded spout is the usual fix.

How do I remove a stuck aerator?

Wrap it in a cloth and turn anticlockwise with a gentle grip or pliers. Soaking it in vinegar loosens scale that may be holding it.

Sources

  1. Neoperl: threaded faucet aerators

More guides