Verra

Why does my tap water smell of chlorine?

By the Verra team · Updated

Short answer

Municipal water in India is chlorinated so that a little chlorine stays in the water all the way to your tap and keeps protecting it in the pipes. BIS IS 10500 asks for at least 0.2 mg/l of free chlorine at the consumer end, and most people can taste or smell it. A chlorine smell usually means the disinfection is working, not that the water is unsafe.

Why chlorine is added

Water leaves the treatment plant clean, but it can pick up germs on the long journey through pipes and storage tanks. Utilities add chlorine so that some of it stays behind as residual chlorine and keeps working until the water reaches you.

How much is allowed

The WHO notes that disinfected water usually carries 0.2 to 1 mg/l of chlorine, and that most people can taste chlorine at levels well below its guideline value. That's why you notice it.

StandardFree residual chlorine
BIS IS 10500:2012, acceptableAt least 0.2 mg/l at the consumer end
BIS IS 10500:2012, permissible1 mg/l
BIS, when protection against viral infection is neededAt least 0.5 mg/l
WHO guideline value5 mg/l

Why it smells stronger some days

The amount reaching your tap varies with how much the utility doses, how close you live to the treatment plant and how long the water sits in pipes and tanks. If the smell changes sharply or the water looks or tastes different, ask your local water utility.

Chlorine in the kitchen

Chlorine does its job in the pipes. In the kitchen, many people would rather not rinse salad greens, fruit and cooking utensils in water that smells of it. Kitchen by Verra conditions the tap water you wash with; in lab tests under test conditions, it reduced chlorine by more than 99.9% (IS 3025).

Each kit includes home chlorine test strips, so you can compare your own tap before and after. It is not a drinking-water purifier; use it alongside one.

Questions people ask

Is chlorine smell in tap water harmful?

Free chlorine at the levels used in city supply (around 0.2–1 mg/l) is within the BIS IS 10500 limits and well below the WHO guideline value of 5 mg/l. A smell usually means the water has been disinfected.

How can I test chlorine in my tap water?

Use chlorine test strips: dip one in a glass of tap water and compare the colour with the chart. Kitchen by Verra includes two containers of strips in the box.

Does boiling remove chlorine?

Chlorine is volatile, so boiling and standing water uncovered lower it. That doesn't help the water you wash produce and utensils in straight from the tap.

Sources

  1. BIS IS 10500:2012 Drinking Water Specification
  2. WHO chemical fact sheet: Chlorine (2022)

More guides